PLASTI-KOTE CO INC -- 231, ENGINE ENAMELS GOLD  -- 8010-00N030818
<pre>=====================  Product Identification  =====================

Product ID:231, ENGINE ENAMELS GOLD
MSDS Date:10/15/1986
FSC:8010
NIIN:00N030818
=== Responsible Party ===
Company Name:PLASTI-KOTE CO INC
Address:1000 LAKE RD
City:MEDINA
State:OH
ZIP:44256
Country:US
Info Phone Num:216-725-4511
Emergency Phone Num:216-725-4511
CAGE:07778
=== Contractor Identification ===
Company Name:PLASTI-KOTE CO INC
Address:1000 LAKE ROAD
City:MEDINA
State:OH
ZIP:44256
Phone:(216) 725-4511
CAGE:07778
Company Name:TEMPO PRODUCTS CO A PLASTI-KOTE CO INC
Address:1000 LAKE ROAD
Box:City:MEDINA
State:OH
ZIP:44256
Country:US
Phone:330-725-4511
CAGE:07708

=============  Composition/Information on Ingredients  =============

Ingred Name:ACETONE. VP: 186 @ 20C
CAS:67-64-1
RTECS #:AL3150000
Fraction by Wt: 30-40%
OSHA PEL:1000PPM
ACGIH TLV:750PPM/1000STEL;9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:XYLENE. VP: 5.1 @ 20C
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 5-10%
OSHA PEL:100 PPM;150 PPM STEL
ACGIH TLV:100 PPM;150 PPM STEL
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:ETHYL ALCOHOL; (ETHANOL). VP: 0.9 @ 20C
CAS:64-17-5
RTECS #:KQ6300000
Fraction by Wt: 5-10%
OSHA PEL:1000 PPM
ACGIH TLV:1000 PPM

Ingred Name:4-HYDROXY-4-METHYL-2-PENTANONE; (DIACETONE ALCOHOL). VP:
    0.8 @ 20C
CAS:123-42-2
RTECS #:SA9100000
Fraction by Wt: 5-6%
OSHA PEL:50 PPM
ACGIH TLV:50 PPM

Ingred Name:2-BUTANONE; (METHYL ETHYL KETONE). VP: 70 @ 20C
CAS:78-93-3
RTECS #:EL6475000
Fraction by Wt: <5%
OSHA PEL:200 PPM;300 PPM STEL
ACGIH TLV:200 PPM;300 PPM STEL
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:PROPELLANT CONSISTING OF INGREDIENTS 7, 8 & 9
RTECS #:9999999ZZ

Ingred Name:PROPANE
CAS:74-98-6
RTECS #:TX2275000
Fraction by Wt: 23%
OSHA PEL:1000 PPM
ACGIH TLV:SIMPLE ASPHYXIANT

Ingred Name:PROPANE, 2-METHYL-; (ISOBUTANE)
CAS:75-28-5
RTECS #:TZ4300000
Fraction by Wt: MIXTURE

Ingred Name:BUTANE; (N-BUTANE)
CAS:106-97-8
RTECS #:EJ4200000
OSHA PEL:800 PPM
ACGIH TLV:800 PPM

Ingred Name:NON HAZARDOUS INGREDIENTS
Fraction by Wt: 15-20%

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL:EXCESSIVE INHALATION OF
    VAPORS CAN CAUSE NASAL & RESPIRATORY IRRITATION, DIZZINESS,
    WEAKNESS, FATIGUE, NAUSEA, HEADACHE, POSSIBLE UNCONSCIOUSNESS &
    EVEN ASPHYXIATION. EYE:CAN CAUSE SEVERE  IRRITATION, REDNESS,
    TEARING, BLURRED VISION. INGEST:CAN CAUSE GI IRRITATION, NAUSEA,
    VOMITING, DIARR.(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: SKIN:CAN CAUSE IRRIT FOR SOME
    PERSONS. CHRONIC: RPTS HAVE ASSOC RPTD & PRLNGD OCCUP OVEREXP TO
    SOLV W/ PERM BRAIN & NERVOUS SYSTEM DMG. SEVERE OVEREXP IN LAB
    ANIMALS HAS ALSO CAUSED LIVER AB NORMALITIES & DMG TO KIDNEYS,
    LUNGS & SPLEEN. INTENTIONAL MISUSE BY DELIB CONC & INHALING
    CONTENTS MAY BE HARMFUL/FATAL.
Medical Cond Aggravated by Exposure:CAN CAUSE ALLERGIC RESPIRATORY
    AND/OR SKIN REACTION.

=======================  First Aid Measures  =======================

First Aid:INHAL:REMOVE INDIV TO FRESH AIR.IF BRTHG DFCLT,ADMIN
    OXYGEN.IF BRTHG STOPS,GIVE ARTF RESP & CALL MD.EYES:FLUSH W/ WATER
    FOR AT LEAST 15 MIN WHILE OCCASNLY HOLDING LIDS OPEN.CALL
    MD.INGEST: DO NOT INDU CE VOMIT (ASPIR OF MATL INTO LUNGS CAN CAUSE
    CHEM PNEUM, WHICH CAN BE FATAL).KEEP PERSON WARM, QUIET & CALL
    MD/POISON CONTROL CTR.SKIN: WASH W/SOAP & WATER/VARIOUS HAND
    CLEANERS & WASH CLTH BEFORE REU

=====================  Fire Fighting Measures  =====================

Flash Point:SUPP DATA
Lower Limits:1.0%
Extinguishing Media:"ALCOHOL" FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
    .WATER SPRAY MAY BE INEFT.WATER MAY BE USED TO COOL CLSD CNTNRS TO
    PVNT PRESS BUILD-UP & POSS (SUPP DATA)
Unusual Fire/Explosion Hazard:CLSD CNTNRS MAY EXPLODE AND/OR AUTOIGNITE
    WHEN EXPSD TO EXTREME HEAT.VAPS ARE HVR/AIR & MAY TRAVEL ALONG
    GROUND/MAY BE MOVED BY VENT & IGNITED BY (SUPP DATA)

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. VENTILATE
    AREA. ABSORB LIQUID ON PAPER, VERMICULITE, FLOOR ABSORBENT OR OTHER
    ABSORBENT MATERIAL AND TRANSFER TO A CLOSED CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE IN AREAS ABOVE 120F, OR
    IN DIRECT SUNLIGHT, OR NEAR HEAT OR OPEN FLAMES. DO NOT PUNCTURE OR
    INCINERATE.
Other Precautions:STORE LARGE QUANTITIES IN BUILDINGS PROTECTED FOR
    STORAGE OF NFPA CLASS 1C FLAMMABLE LIQUIDS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:FOR CASUAL/OCCASNL USE-TO AVOID BRTHG VAPS/SPRAY
    MIST,OPEN WINDOWS/DOORS/USE OTHER MEANS TO ENSURE FRESH AIR ENTRY
    DURING APPLICATN/DRYING.IF YOU EXPERIENCE EYE
    WATERING/HDCH/DIZZ/INCR FRESH AIR. WEAR  NIOSH/MSHA APPRVD RESP
    PROT/LEAVE AREA.
Ventilation:FOR REGULAR/CONTINUOUS USE-PROVIDE SUFF MECHANICAL
    (GENERAL) AND/OR LOCAL EXHAUST VENTILATION TO MAINTAIN EXPOS
    <TLV'S.
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:WHERE SPECIAL OR UNUSUAL CONDITIONS EXIST,
    THE EXPERT ASSISTANCE OF INDUSTRIAL HYGIENIST SHOULD BE SOUGHT.
Work Hygienic Practices:WASH HANDS BEFORE EATING OR USING WASHROOM. AS
    WITH ALL CHEM, MINIMIZE PERSONAL CONTACT & BREATHING OF VAPORS.
Supplemental Safety and Health
EVAP RATE:PROPELLANT:<1 (BUTYL ACETATE = 1). FLASH POINT:0F(-18C);
    (PROPELLANT = 100F). FIRE FIGHT PROC:AUTOIGNIT/EXPLO WHEN EXPSD TO
    EXTREME HEAT.IF WATER USED, FOG NOZZ ARE PREF. EXPLO HAZ: PILOT LI
    GHTS, OTHER FLAMES, SPARKS, HEATERS, SMOKING, ELEC MOTORS/OTHER
    IGNIT SOURCES AT LOCATIONS DISTANT FROM MATL HNDLG POINT

==================  Physical/Chemical Properties  ==================

HCC:V3
Boiling Pt:B.P. Text:>133F,>56C
Melt/Freeze Pt:M.P/F.P Text:1500F,816C
Vapor Pres:SEE INGRED
Vapor Density:HVR/AIR
Spec Gravity:<1 (H2O=1)
Evaporation Rate &amp; Reference:PRODS:>1; (SUPP DATA)
Solubility in Water:SLIGHT TO MODERATE
Appearance and Odor:TYPICAL SOLVENT PAINT.
Percent Volatiles by Volume:85-90

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS AND HEAT.
Stability Condition to Avoid:HEAT, SPARKS, AND OPEN FLAME.
Hazardous Decomposition Products:MAY FORM TOXIC MATERIALS, CO2/CO,
    VARIOUS HYDROCARBONS, NITROGEN COMPOUNDS, ETC, WHEN BURNED.

====================  Disposal Considerations  ====================

Waste Disposal Methods:MATERIAL COLLECTED ON ABSORBENT MATERIAL MAY BE
    DEPOSITED IN A POSTED TOXIC SUBSTANCE LANDFILL IN ACCORDANCE WITH
    FEDERAL, STATE AND LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.